|
|
Who??
Mar 26, 2010 23:58:21 GMT 12
Post by gemininja on Mar 26, 2010 23:58:21 GMT 12
"raced" a nice red TE after nightspeed. [NEVREV]
i say raced- but the bastard had a turbo so i didnt stand a chance haha
surely someone must know him if hes got a turbo gem... i dont think ive seen it on here but i could have missed it.
|
|
|
|
Who??
Mar 27, 2010 7:58:32 GMT 12
Post by misdablack on Mar 27, 2010 7:58:32 GMT 12
street racing is bad mmm...kay!
tim said u got some 'vette bumpers 4 sale?
|
|
|
|
Who??
Mar 27, 2010 13:01:14 GMT 12
Post by gemininja on Mar 27, 2010 13:01:14 GMT 12
street racing is bad mmm...kay! tim said u got some 'vette bumpers 4 sale? haha yes it is. it wasnt really raceing i just wanted to talk to the Mrs Funt'maRunt but he kept boostn off =D i do yup. you want? |
|
|
|
Who??
Mar 27, 2010 14:14:17 GMT 12
Post by crazytim on Mar 27, 2010 14:14:17 GMT 12
street racing is bad mmm...kay! tim said u got [glow=red,2,300]A[/glow] 'vette [glow=red,2,300]bumper[/glow] 4 sale? Already got dibbs on rear bumper!! |
|
|
|
Who??
Mar 27, 2010 14:14:42 GMT 12
Post by misdablack on Mar 27, 2010 14:14:42 GMT 12
yeah boe. pm! only really after a singly but will take both whateva.
|
|
|
|
Who??
Mar 27, 2010 14:15:53 GMT 12
Post by crazytim on Mar 27, 2010 14:15:53 GMT 12
NEVREV has a turbo injected G200 (I'm pretty sure G200...)
He picked off parts off me the other week after you were at my place jesse... have pics of his engine bay somewhere...
Told him to look up our little forum...
|
|
|
|
Who??
Mar 27, 2010 14:22:38 GMT 12
Post by misdablack on Mar 27, 2010 14:22:38 GMT 12
put the pics up. rangi job or pro stuff? whats story with troy making x members? got some measurements eh. use the 2nd set of bolt holes on the g-box tho. straight piece across with a anti-vib bush bolted through to g-box. have to weld two plates in either side where it bolts to chassis(cut/use seat bracket).
|
|
|
|
Who??
Mar 27, 2010 17:25:03 GMT 12
Post by crazytim on Mar 27, 2010 17:25:03 GMT 12
how about you wait until he has a chevette on his hoist with a g series bolted in the bay and trust in his professional opinion of how it should be.
He reckons bolting to seat brackets will be fail at Cert time and trust me when the vette leaves my property EVERYONE WILL KNOW!!! ;D ;D ;D
I will ask him to make the x-member 1st priority k!
|
|
|
|
Who??
Mar 27, 2010 17:31:23 GMT 12
Post by mcqunt on Mar 27, 2010 17:31:23 GMT 12
actually mine was certed with the gearbox xmember bolted
through the seat brackets
|
|
|
|
Who??
Mar 27, 2010 18:45:45 GMT 12
Post by misdablack on Mar 27, 2010 18:45:45 GMT 12
how about you wait until he has a chevette on his hoist with a g series bolted in the bay and trust in his professional opinion of how it should be. He reckons bolting to seat brackets will be fail at Cert time and trust me when the vette leaves my property EVERYONE WILL KNOW!!! ;D ;D ;D I will ask him to make the x-member 1st priority k! nah not thru seat brackets. drill new holes parellel to gbox mounting point. just cut bracket to use as strengthening points at the chassis bolt holes. 2 x 3" wide. its a shorter distance across so will be alot stronger. |
|
|
|
Who??
Mar 27, 2010 19:39:19 GMT 12
Post by gemininja on Mar 27, 2010 19:39:19 GMT 12
NEVREV has a turbo injected G200 (I'm pretty sure G200...) He picked off parts off me the other week after you were at my place jesse... have pics of his engine bay somewhere... Told him to look up our little forum... good to know |
|
|
|
Who??
Mar 27, 2010 21:11:16 GMT 12
Post by crazytim on Mar 27, 2010 21:11:16 GMT 12
actually mine was certed with the gearbox xmember bolted through the seat brackets didn't yours bust a couple of g-boxes? Thats why I sent it to the far corners of the barn!  |
|
|
|
Who??
Mar 27, 2010 21:13:13 GMT 12
Post by crazytim on Mar 27, 2010 21:13:13 GMT 12
how about you wait until he has a chevette on his hoist with a g series bolted in the bay and trust in his professional opinion of how it should be. He reckons bolting to seat brackets will be fail at Cert time and trust me when the vette leaves my property EVERYONE WILL KNOW!!! ;D ;D ;D I will ask him to make the x-member 1st priority k! nah not thru seat brackets. drill new holes parellel to gbox mounting point. just cut bracket to use as strengthening points at the chassis bolt holes. 2 x 3" wide. its a shorter distance across so will be alot stronger. Will still be Troy's call, his cert guy will be scrutinizing the work on mine. If you wanna go elsewhere it's not an issue, otherwise you'll just have to be patient (like I've been the last 20odd months Chevini has been slumbering for... :  |
|
|
|
Who??
Mar 27, 2010 21:28:04 GMT 12
Post by misdablack on Mar 27, 2010 21:28:04 GMT 12
youre right bro. best to have everything done properly for this sort of nuts.
|
|
|
|
Who??
Mar 27, 2010 21:38:29 GMT 12
Post by gordo on Mar 27, 2010 21:38:29 GMT 12
youre right bro. best to have everything done properly for this sort of nuts. Yeah, very satisfying getting pulled over and being 100% legal! |
|
