|
|
Post by misdablack on Jun 10, 2010 12:45:09 GMT 12
pizza diff...  goes here...  chevette diff...  goes here.  |
|
|
|
Post by taistorm on Jun 10, 2010 16:58:10 GMT 12
What seats you got in it? kinda looks like rx7 fd seats but hard to tell
|
|
|
|
Post by misdablack on Jun 10, 2010 23:51:16 GMT 12
mazda something or other. not sure. bolted up to chevette brackets
|
|
|
|
Post by crazytim on Jun 11, 2010 9:55:00 GMT 12
Is that diff rooted? Was asked for one on trade me the other day check my chevette hoarder auction...
|
|
|
|
Post by crazytim on Jun 11, 2010 9:56:47 GMT 12
Also piazza diffs have uprite shocks, think you can pivot the shocks to an angle but it fouls on the panhard to mount.
Havn't made it past this point yet myself as it's the green hatch, I'm planning on uprighting the shox to sort it.
|
|
|
|
Post by misdablack on Jun 11, 2010 10:33:47 GMT 12
theyre angled shocks eh. panhard mount been changed to the other side too - and yes diff is pretty Barry Whiteed
seats out of a mazda eunos v6 jobbie
maybe someone modded your diff to fit a sedan?
|
|
rxdato
Junior Member
Posts: 57
|
Post by rxdato on Jun 13, 2010 18:33:14 GMT 12
what torque tube is that man?? is that off the chevette diff?
|
|
|
|
Post by misdablack on Jun 13, 2010 18:41:01 GMT 12
nah bro pizza. just sorting out how to mount it as the x-member ive found out is way too big - aside from bashing the under side. might be possible to swap for a gemini one
|
|
|
|
Post by misdablack on Jun 13, 2010 18:44:17 GMT 12
twin webers  |
|
rxdato
Junior Member
Posts: 57
|
Post by rxdato on Jun 13, 2010 18:51:44 GMT 12
oh tru is that the diff i sold ya?? have u cut the x member down a bit .. how long till ya get her runninig?
|
|
|
|
Post by misdablack on Jun 13, 2010 21:05:01 GMT 12
yeah boh. hopefully not too long eh. gotta get the sedan working first so i can chop the piazza up
|
|
|
|
Post by cul8r on Jun 13, 2010 22:48:58 GMT 12
Is that the manifold I sold to geminininja? I sent some brand new gaskets to him too...
I dont know what the piazza diff is like to put in, but the gemini one I had to redrill the torquetube mount holes by around 15mm each side in the torquetube mount itself..
|
|
|
|
Post by misdablack on Jun 13, 2010 23:15:58 GMT 12
Is that the manifold I sold to geminininja? I sent some brand new gaskets to him too... I dont know what the piazza diff is like to put in, but the gemini one I had to redrill the torquetube mount holes by around 15mm each side in the torquetube mount itself.. yeah been there done that. got a gem diff in my sedan already. piazza's the same apart from pan hard mount & x member. plus its got angled shocks so perfect for a hatch. tried b4 and may be able to get the gem xmember on the piazza torque tube. |
|
|
|
Post by misdablack on Aug 15, 2010 20:47:40 GMT 12
new look hatchy  btw now has dirty little 1256 reinstalled as ran out of time with this project and need the car mobile. did actually have piazza diff installed properly in the end. for anyone wanting to put one in their gem or chevette heres a list of what you need: chevette rear sway bar and linkages (piazza one is too short) gem torque tube and x-member (bolts straight on) custom brake hose at least 750mm in length cut/weld panhard rod mount on opposite side thats it basically everything else mounts up sweet as. chur! |
|
|
|
Post by cul8r on Aug 15, 2010 22:18:19 GMT 12
They 13 or 14 rims?
|
|
