|
|
Post by burntrubber on Mar 25, 2006 15:33:13 GMT 12
I can fabricate all the pipeing but I would have to get someone else to weld it off because I don't have a TIG welder capable of welding Alloy  . I tack all my stuff up with MIG and then get someone to finish it off. Alloy MIG tends to be porus and not 100% air tight. I'm looking at buying my own TIG maybe if I can find a second hand one. |
|
|
|
Post by mikuni on Mar 25, 2006 16:20:28 GMT 12
*just noticed* Look at this guy, always flashing his money around all over the show! talk about bling bling! ;D |
|
|
|
Post by zep on Mar 26, 2006 2:42:51 GMT 12
Haha yeah man, its a British Pound so worth like three hucka down there  |
|
|
|
Post by burntrubber on Apr 3, 2006 21:59:14 GMT 12
Pretty much finished my plenum now just a few bits like throttle cable mount and vacume/boost hose tails to sort plus a whole lot of sanding and polishing which I do actually like doing. I ended up welding it up myself also looks ok I think   |
|
|
|
Post by zep on Apr 3, 2006 22:33:34 GMT 12
yeah man, it looks the biz!
Good job dude. I gotta get on to mine soon, start sorting out that throttle bypass and stuff...
rarr, to much to do...
|
|
|
|
Post by defcon on Apr 4, 2006 14:26:57 GMT 12
Thats looks great B/r, you got some skills there. How in earth are you guna get he intake pipe from the turbs/ i.c in there, looks a tight squeeze?
|
|
|
|
Post by burntrubber on Apr 4, 2006 16:23:12 GMT 12
Nah its not a tight squeeze at all. Will only be about 300mm from the intercooler to the throttle body should work well I reckon.
|
|
|
|
Post by defcon on Apr 4, 2006 17:12:38 GMT 12
Oh wikid, must be the angle of the photo then, just looks like the throttle body is pointed right at the relay box! Still guna be using the rx7 i/c?
|
|
|
|
Post by burntrubber on Apr 4, 2006 18:12:48 GMT 12
|
|
. I tack all my stuff up with MIG and then get someone to finish it off. Alloy MIG tends to be porus and not 100% air tight. I'm looking at buying my own TIG maybe if I can find a second hand one.
