|
Post by 77vette on Jul 16, 2006 20:34:44 GMT 12
These are some pics of my chevette from when i got it back in early 2005. Barry Whitehttp://img83.imageshack.us/img83/6083/img1105rh1.jpg[/img] Mrs Funt'maRuntholehttp://img80.imageshack.us/img80/8247/img1108ti0.jpg[/img] When i get around to it i'll take some picks of it, as it is now. It's lower and a tad more rusty ;D One day, once i finish my rx7 and fix my skyline ;D i'll probably put a new engine in it. Not sure what but possibly a 10a with an rx3 4speed or a 13b turbo based engine. I had considered the 2.3 bedford engine but i've gone off that idea. Plus every wrecked van i look in seems to have a friggn holden 202.
|
|
|
Post by mikuni on Jul 18, 2006 17:22:06 GMT 12
Thats cool man. Leaves the 3 for dead! Would be great to see it with a repower aswell! I say sell the 7 and the skyline.. or put an rb20 in it.. that would be sool aswell.
|
|
|
Post by 77vette on Jul 18, 2006 18:16:01 GMT 12
Thats cool man. Leaves the 3 for dead! Would be great to see it with a repower aswell! I say sell the 7 and the skyline.. or put an rb20 in it.. that would be sool aswell. Haha nah man its an 808. One of the few cars i can match in a drag race ;D And i really waste its arse in the top speed runs ;D
|
|
|
Post by zep on Jul 18, 2006 19:22:36 GMT 12
Look nice as dude, I love the rear ends, and the front is slowly growing on me. Should hook up an HSR wide body kit for it
|
|
|
Post by 77vette on Jul 18, 2006 19:33:38 GMT 12
Look nice as dude, I love the rear ends, and the front is slowly growing on me. Should hook up an HSR wide body kit for it Yeh those look fully sick I was at pukekohe a couple of months back and this fula had an hsr replica (racing car). It was friggn choice man, he had the wide body kit, mini lights and the 2.3 bedford. The guy even shipped over a flash twin cam head from GB.
|
|
|
Post by 77vette on Aug 9, 2006 21:35:20 GMT 12
Put a rota in my 'vette. au Haha, nah, not yet. I've decided against buying that 10a cos it'll be to nutsty. I'm gona go 13b turbo insted The plan is to build a cheap 13b out of the blown engine that ive got(just need rotors+ housings and seals/gaskets) and wack that in my rx7. Once i've finnished doing all the other nuts to my 7 i'll wip that engine out and put in the flash one i've already started buying parts for. Then this will leave me with a spare 13b I also wont be using my standard oil cooler, any of the electronics, flywheel + clutch and probably not the gearbox. Which means i'll have nearly everything i need for my Chevette
|
|
|
Post by mikuni on Aug 10, 2006 20:42:20 GMT 12
Haha crack up. Sounds like a good plan tho man. I say 13b the 7 and drop a 13bt in this tho! Would be way phatta
|
|
|
Post by 77vette on Aug 10, 2006 20:55:21 GMT 12
Nah man thats what i am doing! PP in the seven and turbo in chevette ;D External oil cooler here we come
|
|
|
Post by mikuni on Aug 11, 2006 9:56:10 GMT 12
Oh I see. Awesome I got confused by all the words. Yay I plan on sticking an oil cooler out the front of mine to. I had all the bits to do in on my twincam but now I'm not using one of them so I'm stuck. Ahwell, will just have to put an external one on the 1256! hehe.. it won't even warm up probably.
It was funny watching a conversation on ozgem about chevettes. The guys reckon that they don't have a whole in the front so will over heat! crack up. Silly aussies.
Can't wait to see this thing turbo aye. Will be the meanist chevette EVAH. You reckon it'll be done by the end of the year?
|
|
|
Post by 77vette on Aug 12, 2006 0:26:20 GMT 12
Hahaha end of the year!!! man, ill be lucky if its done by the end of the decade. Rota Nats 2010 au ;D Yeah man external oil coolers are the nuts!! the one in my rx7's quite big so it will look pretty gangstah. I scored some cool steelies the other day, ill post some pics up later on. Also i may be geting a rusty ra40 Celica off a mate for cheap so ill grab the w50 out of that and then adapt a 13b bellhousing onto it. Otherwise ill have to look for another gearbox, prob 13b turbo like West's. I've also got to decide on a diff to use. Any ideas? I dont really need a massive hilux one or anything cos i'll be runing a fairly standard engine(230-250bhp at the flywheel)
|
|
|
Post by 77vette on Aug 12, 2006 20:02:17 GMT 12
I think i'll go for a Piazza diff. Next time i see one at pickapart ill grab it. I heard they fit well into Geminis so i assume it will go well into my Chevette, somebody please correct me if im wrong
|
|
|
Post by 77vette on Aug 18, 2006 18:22:36 GMT 12
This is how the car looks now: some cool wheels i scored. I think they would look good widened my engine ;D
|
|
|
Post by mikuni on Aug 18, 2006 18:25:19 GMT 12
Awso the car does look great! Maybe just a tiny bit lower tho I think. Maybe once you get some nice widened steels on then it'll be the sh*t (no not the nuts). Luving the engine too, looks like a minter
|
|
|
Post by 77vette on Aug 18, 2006 18:39:15 GMT 12
Haha dont worry bro i work for Mazda dis my good engine parts also none of you fulas better not fink ov theving off wit my nuts, cos my ghetto gangstah kitten will F*ck you up
|
|
|
Post by zep on Aug 19, 2006 0:37:44 GMT 12
You should fully buy those honey comb rims on Trademe and widen them. Would be awesome on your car
|
|