dpns
New Member
Posts: 8
|
Post by dpns on Jul 17, 2010 18:25:09 GMT 12
ok new plan i need a standard 1256 inlet manifold
how meny types are there ?
the one on mine runs a zenith down draft carb.
cheers
dan
|
|
|
|
Post by cul8r on Jul 17, 2010 20:05:38 GMT 12
0212973930
Zac, tell him Chris sent you.. He's in Chch, cars not though.. Hopefully he's still got the old motor...
Should be able to sort you out with a SU & Chevette Inlet...
|
|
|
|
Post by gordo on Jul 17, 2010 20:16:05 GMT 12
ok new plan i need a standard 1256 inlet manifold how meny types are there ? the one on mine runs a zenith down draft carb. cheers dan Downdraft was the Vivas - late model HCs had the CD - like an SU. Should have some floating around somewhere in the mess that is the garage. There were a couple of variations of the CD, as the later ones were modified for emissions reasons. They all do the same job, as long as they have the right needle and spring. |
|
dpns
New Member
Posts: 8
|
Post by dpns on Jul 17, 2010 20:17:47 GMT 12
0212973930 Zac, tell him Chris sent you.. He's in Chch, cars not though.. Hopefully he's still got the old motor... Should be able to sort you out with a SU & Chevette Inlet... is that zac our man at repco? |
|
dpns
New Member
Posts: 8
|
Post by dpns on Jul 17, 2010 20:23:08 GMT 12
ok new plan i need a standard 1256 inlet manifold how meny types are there ? the one on mine runs a zenith down draft carb. cheers dan Downdraft was the Vivas - late model HCs had the CD - like an SU. Should have some floating around somewhere in the mess that is the garage. There were a couple of variations of the CD, as the later ones were modified for emissions reasons. They all do the same job, as long as they have the right needle and spring. i wouldnt mind one like the one i have for the zenith carb ive got my motor all running now but i wouldnt mind fitting the weber that came with it(the one ive been trying to mind a manifold for) and the reason i want another one is ive cut a alloy flang for the weber and i want to take that standard one and cut and weld the flage on . |
|
|
|
Post by cul8r on Jul 18, 2010 0:21:47 GMT 12
Yea Repco Zac
|
|
|
|
Post by gordo on Jul 22, 2010 0:32:22 GMT 12
|
|
