|
|
Post by gordo on Mar 10, 2010 16:56:50 GMT 12
use seat bracket for x-member. exhaust has to be custom as exhaust mani on opposite side & gearbox xmember comes straight across & blocks path of stock exhaust pipe. seat bracket bends up & over exhaust whereas youll want the xmember to come straight across. shouldnt be more than $150-200 to get someone to make something up. advise double & triple checking measurements b4 hand & have all bolt holes slotted to give yourself a bit of leeway. electric fuel pump & twin weber d/draughts. Barry White off the nikki - too many wires & nuts! (if youre going carby otherwise aftermarket ecu) gotta cut a hole for the shifter too ps: gimme your piazza front discs & calipers!  Got a set of front vented Piazza disks and calipers - need a good clean up but if you're interested? |
|
|
|
Post by misdablack on Mar 10, 2010 18:03:20 GMT 12
oh yeah mate! cheers gordo.
|
|
rxdato
Junior Member
Posts: 57
|
Post by rxdato on Jun 13, 2010 18:14:33 GMT 12
hmmmm radiator?? some ideas on mounting and what do i use chevette or what .. cheers  |
|
|
|
Post by misdablack on Jun 13, 2010 18:36:52 GMT 12
need to cut up front. id go a gem radiator with an elecki fan. engine fan wont fit obviously. dont u have to use g161 water pump/pulley/cover etc? coz the g200's got all the power steering/air con shiz.
|
|
rxdato
Junior Member
Posts: 57
|
Post by rxdato on Jun 13, 2010 18:42:38 GMT 12
nah i just pulled all the aircon etc stuff off .
|
|
|
|
Post by crazytim on Jun 13, 2010 18:55:58 GMT 12
you mean the lower pulley? has 3 belts going to it, one of them will unbolt, chopped 2nd one off on mine (or at least Troy did)
|
|
|
|
Post by misdablack on Jun 13, 2010 21:14:28 GMT 12
nah i just pulled all the aircon etc stuff off . yeah obviously youd pull that off lol. that leaves u with 2 useless pulleys tho. g161 will slot right in there |
|
