|
|
Post by burntrubber on Sept 17, 2009 15:15:21 GMT 12
Piazza panard is the other way it mount on the tube not on the spring seat also. I had to make a mounting point in my tg also the shock mounts are a pain when the cars as low as mine the diff flattens out and the pin starts to put preasure on the bush nmeed to sort that one day  |
|
|
|
Post by gemininja on Sept 17, 2009 19:04:06 GMT 12
so what were saying is it IS possable for me to shove a piazza diff in my vette. k sweet haha.
|
|
|
|
Post by cul8r on Sept 17, 2009 22:17:08 GMT 12
Yes, you need to change shock mounts, panhard mounts, and some of the torque tube setups are different.. Also slightly wider track
Gemini's go in far far easier
|
|
|
|
Post by crazytim on Sept 18, 2009 8:40:38 GMT 12
so unless its an LSD its a lot of effort just to get discs... or are pizza single spinners way tougher? Actually must be better than late model whiney Salisbury diffs...
|
|
|
|
Post by crazytim on Sept 18, 2009 8:42:01 GMT 12
I remember seeing that diff, but it was a while ago now. I am pretty sure Piazza diffs have the panhard rod on the other way, so that is probably the reason for the shock/panhard rod interferance, rather than a difference or similarity between upright and angled shock mounts. haha never compared it to a gemmi diff... when the time comes will chuck one under it and see what I'm up for... |
|
|
|
Post by gemininja on Sept 19, 2009 14:59:56 GMT 12
haha anyone wana buy a gemini. no gbox, engine, rear diff. =D
|
|
|
|
Post by crazytim on Sept 19, 2009 23:16:26 GMT 12
How much you after... could chuk some of my shiz innit and split the proceeds in a fair manner... prob wont get stuff all for a shell.
|
|
|
|
Post by gemininja on Sept 20, 2009 16:37:25 GMT 12
will see if i can get her running over the next few weeks, i even spent an hour on it this weekend.
i can officially say temp sensor is fine, as is the TPS. i know ECU and AFM are good. will test the O2 sensor this week and check for any more fvcked vac lines.
other than that im thinking perhaps manifold leak, or cam timing. both of wich will be a hellova lot easyer with the engine out of the car.
|
|
