|
|
Post by crazytim on Sept 1, 2009 13:37:39 GMT 12
And yeah, slimmer bumpers (need to find some). Mite be able to swap you some... |
|
|
|
Post by zep on Sept 1, 2009 14:43:10 GMT 12
Had a look at this website: www.1010tires.com/WheelOffsetCalculator.aspCurrent wheels are 7" and +40 offset. I tested both sets as to where they will sit. Konigs: 34mm more inner clearance, extend 46mm further out Borbets: 12mm more inner clearance, extend 38mm further out. This makes me want to lean towards the Konigs, close to another cm track there. |
|
|
|
Post by zep on Sept 1, 2009 14:44:21 GMT 12
Will get out a ruler when I get home and measure this to see how this will actually sit. Might take pics.
|
|
|
|
Post by zep on Sept 1, 2009 15:29:13 GMT 12
Yellow car with opal bbombs  |
|
|
|
Post by mikuni on Sept 1, 2009 17:27:54 GMT 12
|
|
|
|
Post by zep on Sept 1, 2009 18:55:39 GMT 12
Haha, my car isn't that slammed boe. + flares please  Nah, I'll have a pshop later on and see what it looks like. Primer patches make it look rank as |
|
|
|
Post by mikuni on Sept 1, 2009 20:21:24 GMT 12
haha I had to put the car that low because the long low mx5 was hard to cover with a shorter and higher car. I already had to cut the front and the back off it because it was overhanging. I fail at ps, like I said. And unfortunately my amature skills don't extend to being able to put flares on  |
|
|
|
Post by mcqunt on Sept 11, 2009 10:17:14 GMT 12
what bout those 15x8 arrow mesh's on the trademe thread
|
|
