Post by 155low on Dec 23, 2008 23:53:37 GMT 12
Thomas4parts
We have been turbo charging and modifying Gemini's for over 20 years.
In the Top Ten street registered four cylinders in Australia 1991 to 1996
11.90 at 117 MPH in 1991 G180 TO4 DCOE WEBERNO NITROUS
11.46 at 112 MPH in 1996 G180 TO4 DCOE WEBER NO NITROUS
9.87 at 137 MPH 2007 4ZD1 NO NITROUS
7.17 at 179 MPH TWIN TURBO 13B ALTERED-- 36 PSI BOOST --(TUNED BY LEE)
10.33 at 134 mph 808 SERIES 6 13B-- 14 PSI BOOST
Turbo manifolds to suit T25, T28, T3, T4 single entry and spilt
pulse,internal and external wastegated. T25 to t3 internal W/gated
to suit "g' & "z" series $550 Add $125 for external W/gated
We can supply new Turbo's.
Modify rodeo inlet manifolds, custom plenums and extra injectors.
Front facing T/body on a i-tec plenum with cable mount to suit vn
T/body $250
Big blow off valves for big boost applications. We have one on Glen
Andersons twin turbo charged 13B alterd and has run a 7.17 at 179
mph. Picture on our web site. $450 includes V-Band clamp and weld on
adapter.
Adjustable cam gears for "z" series. $200
Billet flywheels. Chromoly $500
V-band alloy pipe work adaptors. 3 inch $150
We also do fuel rail modifications to fit after market injectors, and make custom rails with a large volume
extruded aluminium rail it has a 17mm gallery in it. It is $25 for 500mm of rail, plus machining.
We are in the process of making up a turbo kit to suit rear
wheel drive gemini's with "g" or "z" series engines, it will be a turbo manifold,
Garrett GT2860rs 280- 360hp(disco potato)or a gt2876r good for 440 hp,
braided oil feed line and dump pipe. The price of the kit is $2300. If you are keen pm Thomas4parts (OZGEMINI.COM) and title it "Turbo Kit".
Double Row Timing Chain Gaskets---Now in stock $20 a set --
MLS Head Gaskets... $260
MLS Turbo base Gaskets... From $16
MLS "G" & "Z" Exhaust Manifold Gaskets... $35 a set
MLS Gaskets to suit Turbonetics Deltagate or Tial 35mm or 38mm wastegates... $10 each
----- MLS Head gaskets that are made to suit G161's, G180's and G200's with single or double row timing chains. The front bolts are slotted and the water jacket is made smaller so it works with both timing chain setups, the bores have been aligned to match the centres of the block so the gasket seals evenly around the bores. These are capable of boost pressures above 30 PSI. We have now got aligned gaskets to suit 4ZC1, 4ZD1, 4ZE1 engines.
We have 1 on YEP9S (Damien Folley)
YEP9S - Damien Folley 8.809 / 152.49 mph, G180
The quickest Isuzu powered car in the world with a G180...
We can get them in G161, G180, G200, 4ZC1, 4ZD1 and 4ZE1 $260 Plus postage.
We now have the G200 head gaskets. With these gaskets we have taken into account the water jackets for G161 head onto the G200 bottom end------ In Stock Now------
MLS G161, G180, G200 gaskets.
MLS 4ZC1, 4ZD1, 4ZE1 gaskets.
This is a couple of gaskets from our new MLS range..
From the top Left clockwise, they are to suit...
TO4 Split Pulse-- $20
TV Flange--------- $20
TO4 Single entry- $18
T3----------------- $16
T04 Euro Flange- $18
T2----------------- $16
TA45-------------- $20
These Turbo gaskets are not single use gaskets like most of your normal turbo gaskets. These gaskets are good for a couple turbo changes and seal like no other....
We have MLS Gaskets to suit Turbonetics Deltagate or Tial 35mm or 38mm wastegates... 2 layer with a flame ring... $10 each
We have MLS gaskets to suit "G" and "Z" series exhaust manifold. These gaskets are 5 layer with a flame ring...$35 a set
"Z" series
"G" series
To order any of these Gaskets, we need the following....
You need to PM Thomas4parts (OZGEMINI.COM) with your address and the engine with a bore size you wish to buy...
With this received I will PM you back with our Bank Details, and a total you need to transfer. We need the transfer to be tagged with your username for easy ID of your payment( if the bank will only tag with numbers or your username will not work), PM me with the tag you put with your payment. This way I can look for it in our account...
We are dealers for Haltech, Sonic Performance and tune Haltech efi.
We can build and fit turbo motors with forged pistons, forged rods,
copper head gaskets, o-ringed block, arp head stud kits.
We are brisbane, on the net at THOMAS4PARTS.COM or OZGEMINI.COM.
