|
|
Post by gordo on Jul 8, 2008 22:56:32 GMT 12
Just got to sort out what to do with them ...  Off a GSXR 1000 - 44mm |
|
|
|
Post by mikuni on Jul 9, 2008 11:38:03 GMT 12
Nice  You gottem cheap I take it? Look like they'd be worth a bit if you want to onsell them to the right person. Personally if I was to use ITB's for an injected setup I think 4age ones are just too perfect to surpass. |
|
|
|
Post by jaygti on Jul 9, 2008 12:06:50 GMT 12
Is that 2 fuel rails/8 injectors on there, or does it just look like that from the angle of the photo?
|
|
|
|
Post by gordo on Jul 9, 2008 18:25:03 GMT 12
Is that 2 fuel rails/8 injectors on there, or does it just look like that from the angle of the photo? Been doing some research into them - seems they are two rails and sixteen injectors - the bike is a litre in displacement but produces 180hp, I guess it isn't possible to get accurate metering at both ends of the operating range with a single injestor. There are EIGHT throttle butterflies! The four you see are manually operated and there's a second set operated by the bike ECU, apparently it's to smooth out the low rpm response, increase torque and economy. Going to be quite interesting to have a good look at them, even if they're not used for a while. Oh, Mikuni, $155 including freight - would have been a steal at the $70 opening bid but another party had a bid in  |
|
You gottem cheap I take it? Look like they'd be worth a bit if you want to onsell them to the right person.