|
|
Post by vauxhall499 on Apr 19, 2007 22:14:07 GMT 12
in need of a brake master cylinder for my 2 door 79 chevette eny one has a mint second hand one or know of any one with a brand new one let me know cheers guys
|
|
|
|
Post by zep on Apr 19, 2007 22:55:09 GMT 12
Is this 2 door Chevette in the country, very keen to see.
|
|
|
|
Post by cul8r on Apr 20, 2007 10:07:19 GMT 12
Could just mean Hatch !  Cheers,Chris |
|
|
|
Post by zep on Apr 20, 2007 14:13:49 GMT 12
Oh yeah, well.... fingers crossed
|
|
|
|
Post by mikuni on Apr 20, 2007 16:39:18 GMT 12
People should know not to call them 2 doors on this forum. First lesson when arriving here. Don't say you have a 2 door chevette, unless it is a 2 door chevette! haha all in good humour though, aye ;D
|
|
|
|
Post by gordo on Apr 20, 2007 18:55:04 GMT 12
I've a few but not sure about condition - have you considered getting it sleeved?
|
|
|
|
Post by vauxhall499 on Apr 20, 2007 19:18:00 GMT 12
sweet how much would u want for one i was going to get mine done up but thort i would try here first
AND SORRY GUYS ITS A HATCH BACK ;D
|
|
|
|
Post by gordo on Apr 20, 2007 19:39:07 GMT 12
sweet how much would u want for one i was going to get mine done up but thort i would try here first AND SORRY GUYS ITS A HATCH BACK ;D Got to find them first and, as I said, I don't know their condition. If your car is still in use, you could still use one as a core for sleeving while driving on the other. You have stripped the old one and confirmed its bore is shot? May get by with just a seal kit. |
|
|
|
Post by vauxhall499 on Apr 21, 2007 13:08:40 GMT 12
yer mine needs re sleeving aye was hoping that i could get another to try before i send it away.
i put a new set of seals in too and just blew past them as its so pitted even after a real good hone out
so i have a mint set of seals too so might be able to make a good one out of bits. do urs still have the res tanks still on them as mine is cracked at the top too.
|
|
|
|
Post by crazytim on Apr 21, 2007 14:13:05 GMT 12
mite hava spare tank... covered in blk paint tho...
|
|
|
|
Post by vauxhall499 on Apr 21, 2007 18:12:07 GMT 12
sweet as long as she holds fulid lol how nmuch do u want for it?
|
|
|
|
Post by gordo on Apr 21, 2007 20:15:09 GMT 12
yer mine needs re sleeving aye was hoping that i could get another to try before i send it away. i put a new set of seals in too and just blew past them as its so pitted even after a real good hone out so i have a mint set of seals too so might be able to make a good one out of bits. do urs still have the res tanks still on them as mine is cracked at the top too. Not sure about the reservoirs - I know at least one is stuffed. Where are you? You can either borrow one as you're is sleeved - just paying for the freight/potage each way - or, if you use it, return the old one as part exchange. Not to sure what to ask for it, though. |
|
|
|
Post by vauxhall499 on Apr 22, 2007 17:32:44 GMT 12
i just took my master cylinder apart gain cleaned all parts rubber greesed the new seals and its all good woohooo thanks to u guys that offerd. next thing i want to do is upgrade the front disk and pads eny suggestions  |
|
|
|
Post by 77vette on Apr 22, 2007 17:49:34 GMT 12
] next thing i want to do is upgrade the front disk and pads eny suggestions Piazza brakes are a cheap bolt on upgrade |
|
|
|
Post by zep on Apr 22, 2007 19:03:13 GMT 12
|
|
