A tdc question.

[defcon]

Ive been having a we think about my timing after reading a thread on ozgem. Where should the rotor button be pointing when number 1 cylinder is at TDC, shoould it be pointing at the number one socket on the dizy cap? Next question, my dizzy has been installed 180 degrees out, so the rotor should actually be pointing at number 4 socket when its at tdc #1 correct?

Matt

[burntrubber]

With the engine at TDC the rotor should point at number one. If the dizzy is 180 degrees out you need to change the leads around to the correct order, but on a Gemini you can just rotate the dizzy housing back.