|
|
Post by bulldog on Nov 13, 2009 12:19:43 GMT 12
who's car is the green one? That's the look I'm going for. Need to know springs and wheel sizes and where to get em.
|
|
|
|
Post by 77vette on Nov 13, 2009 12:42:38 GMT 12
mine Angle grinder chevette springs and roh centreless 13x7 from TWL with rostyle centres welded in by tony at steelie gears adjustable panhard rod from whiteline
insert punctuation^
|
|
|
|
Post by bulldog on Nov 13, 2009 13:47:01 GMT 12
what did it cost you if you dont mind me asking? Oh and who are TWL? Oh and what tyres did you use? Don't you get tyre scrape with standard springs though?
How many coils did you cut?
|
|
|
|
Post by 77vette on Nov 13, 2009 17:45:55 GMT 12
i think the roh centreless 13x7 are about 60 bucks each. TWL is a big trucks parts place like repco for trucks. Google them, they are all over the country i think. Steelie gears charged me 240 to remove the centres from the standard wheels and fit them to the ROH wheels. i used advan/yoko a539 175/50 tryes. Cut millions of coils aye lol. Dunno how many in the end. The front is at bumpstop level  bumpstops are better than springs I bent the inner lip thing in on the guards(with a hammer ;D) and that stoped the tyre rub. You can choose your offset/backspacing when you get the centres put into the roh rims. I got mine so they sit about flush with the guard. |
|
|
|
Post by 77vette on Nov 13, 2009 17:55:39 GMT 12
I had it at lots of diff higness levels tho.. this is a bit higher  this is abit lower  and this is max low / unusable  |
|
|
|
Post by mcqunt on Nov 16, 2009 10:01:12 GMT 12
want to get better at this photography bit aye, looked at last effort thought about it abit, and got this for form, will move on to light and exposure when i get a book to study me thinks  |
|
|
|
Post by mcqunt on Nov 16, 2009 10:04:20 GMT 12
think the profile and angle are pretty good but needs more centre
|
|
|
|
Post by cuteweegem on Nov 16, 2009 16:16:50 GMT 12
Rat gems rule and Barry White that looks tough!
New wallpaper/giz more pics ;D
|
|
|
|
Post by crazytim on Nov 16, 2009 21:20:24 GMT 12
want to get better at this photography bit aye, looked at last effort thought about it abit, and got this for form, will move on to light and exposure when i get a book to study me thinks Book? whats that? |
|
|
|
Post by gordo on Nov 16, 2009 21:31:32 GMT 12
A thing you put under a table leg to stop it rocking - thought everyone knew that  |
|
|
|
Post by coggers on Jan 3, 2010 4:45:12 GMT 12
|
|
|
|
Post by coggers on Jan 4, 2010 6:58:55 GMT 12
|
|
|
|
Post by dannyboy on Jan 7, 2010 13:37:15 GMT 12
this is coming around the sweeper at Pukekohe Raceway at around 170/180 km, not a lot of room between the mirrors   |
|
|
|
Post by 77vette on Jan 7, 2010 17:40:38 GMT 12
thats awesome. I think i drag raced that yellow honda at mermere in my chevette. he was like 13 seconds and i was 20 but i bet him off the line |
|
|
|
Post by mikuni on Jan 7, 2010 20:47:27 GMT 12
Thats very cool. Who was passing who?
|
|
bumpstops are better than springs
