|
|
Post by yammies on Jul 13, 2013 20:42:58 GMT 12
Anyone know where you can get chevette wiper arms from? The splines in mine are worn out. Can you buy them new in nz?
|
|
|
|
Post by caine on Jul 16, 2013 10:22:30 GMT 12
I've got a few sets if you want I can have a look if you like?
|
|
|
|
Post by flyingbrick on Jul 16, 2013 21:11:03 GMT 12
Hey yammerson- how about drilling the boss 90 degrees off and tapping for grub screws? Then set in right place and dimple shaft to ensure its located
|
|
|
|
Post by crazytim on Jul 17, 2013 20:48:15 GMT 12
Swap gemini mechanism in? I'm intending to do this...
|
|
|
|
Post by yammies on Jul 19, 2013 22:07:42 GMT 12
Will wait to see if I can get hold of some. Might have some available after this weekend. Otherwise the gem option might work. Is the spacing the same?
|
|
|
|
Post by crazytim on Jul 20, 2013 0:52:35 GMT 12
Pretty sure same item but with bolt on wiper arms unstead of push on.
|
|
|
|
Post by flyingbrick on Jul 20, 2013 20:45:28 GMT 12
Jb weld?
|
|
|
|
Post by yammies on Jul 22, 2013 22:06:10 GMT 12
Nah I want a permanent fix. Quite happy to buy new just dont know where to get them from. If you have some spare arms tim I'll grab them
|
|
