|
|
Post by caine on Jun 8, 2013 20:36:46 GMT 12
hey guys i need a big radiator for the rotary engine can swap my alloy gemini one as its too wide, any opinions? dont have alot of room just under the bonnet latch area and belt drives in the way
|
|
|
|
Post by crazytim on Jun 8, 2013 21:59:58 GMT 12
My wagon brad built has a torana radiator with a remote filler so it semi tucks under the rad panel. Does the job nicely.
I have what you need actually... a brass tanked 626 radiator that has run a 12a in s chevette... one of the brackets needs brazing back on... I have no info or pics about how it mounted in the car came with a shell I bought that had previously run a 12a... apparently it has a piazza lsd but have never popped it open to check.
|
|
|
|
Post by caine on Jun 9, 2013 14:14:24 GMT 12
I'd be keen to have a look. I brought that door and those seats of you ages ago I think
|
|
|
|
Post by yammies on Jun 9, 2013 14:56:32 GMT 12
Im using a 2.4 petrol hilux radiator. Its exactly the same width as the chassis rails, tapers the same too.
|
|
|
|
Post by caine on Jun 9, 2013 18:09:27 GMT 12
Hay tim got a pic of that rad and ill. Try comparing it to mine...
|
|
|
|
Post by crazytim on Jun 9, 2013 23:19:59 GMT 12
will try remember tomorrow...
|
|
|
|
Post by caine on Jun 11, 2013 17:58:22 GMT 12
The one that's in it recessed under the bonnet catch and sitting above the bottom support bar Attachments:
|
|
|
|
Post by caine on Jun 11, 2013 18:00:08 GMT 12
Compared to the Gemini one almost same width and lengh just sticks out good 100mill or so Attachments:
|
|
