|
|
Post by flyingbrick on Apr 29, 2013 15:06:40 GMT 12
Or straight slam panel?
My guards are bent.
I am using them as plugs so they need to be accurate.
I need someone to use some cardboard or stiff paper and make a template showing the curve of the slam panel where it meets the guard. It needs to be pretty accurate- not cut out just traced down so we have a reference.
And then marked so we know where to position template on edge of guard eg grill hole starts here. Bottom of guard is here.
Any help much appreciated!!!
|
|
|
|
Post by cul8r on Apr 29, 2013 19:09:39 GMT 12
Slam panel or the Valence? I have both up in the garage?
|
|
|
|
Post by flyingbrick on Apr 29, 2013 20:15:46 GMT 12
Oh... Look to be honest iv not seen the front of one of these in person or without a bumper so I'm not sure... Is there more that one part that goes between the front guards under the bumper?
Would u like to sell them?
|
|
|
|
Post by cul8r on Apr 29, 2013 22:31:17 GMT 12
Slam panel is the panel the bonnet latch area where the bonnet stay is, that goes from left to right hand side, includes the radiator support panel.
Valence goes directly under the bumper and is like a wee apron
I'll try find some pics
|
|
|
|
Post by flyingbrick on Apr 29, 2013 23:11:45 GMT 12
Oooooh, I need the valence then. Got confused!!
If its a good straight valance that u don't want to sell- can I borrow it?
|
|
|
|
Post by crazytim on Apr 30, 2013 11:35:19 GMT 12
everyone wants it lol
I have a rotten front cut and an entire Chevini if you wanna eyeball and take measurements and are due for a visit to Jafaland
|
|
|
|
Post by flyingbrick on Apr 30, 2013 12:35:09 GMT 12
Not really got time for a drive up there :-( will try this weekend though. Il bring $$ for u, slacker
|
|
|
|
Post by cul8r on Apr 30, 2013 18:28:53 GMT 12
Tims would be better, given Im in chch, and trying to help fix my old gemini...
|
|
|
|
Post by crazytim on Apr 30, 2013 23:08:15 GMT 12
You do mean early gem right? Slack.. yea lol
|
|
|
|
Post by flyingbrick on May 1, 2013 8:17:00 GMT 12
Yeah the nice shape :-) I'm converting the front of mine :-)
You working this sat Tim?
|
|
|
|
Post by crazytim on May 2, 2013 1:33:09 GMT 12
nah... bonfire 4x4 and MEAT meet @ mine
|
|
|
|
Post by flyingbrick on May 2, 2013 6:47:06 GMT 12
Tim, are you in need of a gem boss kit?
|
|
|
|
Post by crazytim on May 3, 2013 13:51:23 GMT 12
Not urgently... actually dont mind my factory wheel
Chevette factory wheels are another story
|
|
