Fs gemini g series suck through turbo conversion

[driftboss89]

Recommended for a g161. This kit comes with the turbo manifold. Decent sized turbo ( no play). A new inlet manifold if needed and a suck through S.U carburettor. Also include the connector between turbo and inlet manifold and a sump modified for the oil return ( with oil lines)

Note the manifold has a flange for an external waste gate

Take it all for $400

[driftboss89]

Note this is a used turbo conversion. No long required as I have gone efi high compression na

[flyingbrick]

where do you get the oil feed from?

[driftboss89]

on the side of the block there is an oil pressure sensor. the feed line has the same tread as the sensor so i used that. Also you can drill and tap into any oil gallery ( with caution!!)