hop
New Member
Posts: 8
|
Post by hop on Apr 16, 2012 20:31:20 GMT 12
G200 motor - all parts from 84 piazza.
Had done 250000k
All injection gear.
Iv stripped the block down will need new bearings.
Mains have been done recently 400 over with light scoring
con rod bearings are the worst for wear.
Ill put pics if anyones interested?
Wanting around $150 for the lot.
Cheers
|
|
|
|
Post by nzgemini666 on Apr 16, 2012 20:36:48 GMT 12
where abouts are you?
|
|
hop
New Member
Posts: 8
|
Post by hop on Apr 16, 2012 22:25:51 GMT 12
My bad
Hamilton about 10mins out of CBD
|
|
|
|
Post by nzgemini666 on Apr 18, 2012 19:07:01 GMT 12
would you sell the injection set up and head?
|
|
hop
New Member
Posts: 8
|
Post by hop on Apr 19, 2012 11:57:58 GMT 12
Yeah mate -
Head with full valve train and rocker cover
Intake manifold with injectors, tb and wiring loom / sensors
Can throw in e1 exhaust mani too.
Give me an offer.
Also have a 4ze1 here. Has been sitting outsite so not in the best shape.
e1 Carb with manifold.
Have a two wire carb type dizzy
Reduction type starter motor - Real good cranking power on a g200.
Valves are much bigger in the e1 and the ozgem guys put them in g200 head.
|
|
|
|
Post by crazytim on Apr 19, 2012 12:45:51 GMT 12
Once bought a motor that had sit under a tree for 2yrs... started first pop and lasted me a further 2yrs till some Mrs Funt'maRunt rear ended me...
|
|
|
|
Post by nzgemini666 on Apr 19, 2012 18:57:12 GMT 12
Il take the head and injecton gear and loom etc um do you have a price i can put money into your account tomorrow also need a price to ship it to christchurch
|
|
|
|
Post by nzgemini666 on Apr 19, 2012 21:20:56 GMT 12
would the crank fit a g161 if so il take that aswell so the head/injecton and crank how much and shipping to christchurch
|
|
hop
New Member
Posts: 8
|
Post by hop on Apr 20, 2012 20:37:21 GMT 12
Hey, from what I read the crank is not suitable in a g161.
if you have a g161 head you could put it on the g200 block and have a high compression 2l.
Good results from this apparantly.
I am busy helping out at the V8's this weekend will get onto it during the week a?
Cheers
|
|
|
|
Post by nzgemini666 on Apr 21, 2012 10:57:46 GMT 12
im wanting more a low compression motor because gonna built a g161 yeah give me a txt when your ready 0273812168 think of a price to
|
|
|
|
Post by crazytim on Apr 21, 2012 19:12:26 GMT 12
I got 3x G161z cranks... offers, as always every dollar made selling parts goes into my T car sanctuary : )
|
|
|
|
Post by mcqunt on Apr 24, 2012 10:07:40 GMT 12
i'll take the rest of the block etc if he takes the head,
i'm in hamilton also jase 022 637 8957
|
|
hop
New Member
Posts: 8
|
Post by hop on Jun 13, 2012 21:32:05 GMT 12
Just a bump, still have this. Also complete a complete g200 with carb from a rodeo
|
|
|
|
Post by jeffsneak on Jun 14, 2012 6:30:31 GMT 12
how much for complete g200?
|
|
|
|
Post by jeffsneak on Jun 14, 2012 6:31:40 GMT 12
^with crab
|
|
