|
|
Post by zep on Dec 9, 2010 21:08:23 GMT 12
Does anyone have one of these? I need to align my clutch ASAP and I'm Barry Whiteed without it! The universal clutch alignment tool I have is ass and I'm doing it under the car.
In Auckland, like, tomorroW!!!
0211597301 pls text or call if you have something that can do the job!
Cheers
Leon
|
|
|
|
Post by crazytim on Dec 9, 2010 22:49:47 GMT 12
I have a 4spd box you can rip apart... Muriwai tho...
|
|
|
|
Post by zep on Dec 10, 2010 8:57:11 GMT 12
Curse you for living in the sticks  I'll see how I go with a bolt and electrical tape, if it doesn't work I'll drive over and some how cut the shaft off. Cheers Tim. |
|
|
|
Post by mikuni on Dec 10, 2010 9:15:22 GMT 12
Try the back end of something large like a ratchet or power bar, get it nice and straight and then check it with a torch and you should be able to get it bang on.
|
|
|
|
Post by crazytim on Dec 11, 2010 9:57:15 GMT 12
Troy pulled another of my 4speeds down a while back. Pretty sure he kept the input shaft for this task will txt him. Would likely be at his shop in gelnfield.
|
|
|
|
Post by 77vette on Dec 11, 2010 16:38:25 GMT 12
i use a socket on a rachet extension thingy has worked with engine in and out of cars sometimes takes alot of Barry Whiteing around |
|
|
|
Post by zep on Dec 13, 2010 9:02:58 GMT 12
I made a tool with a long bolt and some electrical tape to get it snug in the spigot and around the clutch plate. Seemed to work a treat, got box on first go.
|
|
I'll see how I go with a bolt and electrical tape, if it doesn't work I'll drive over and some how cut the shaft off. Cheers Tim.
