|
Post by 202vette on Oct 29, 2010 15:08:34 GMT 12
Hi everyone, I was pointed towards here so decided this looks like a good place to post this build Thanks cul8r and hunted for the body Plans are: Hilux diff rear, holden 202 turbo, 4-speed
|
|
|
Post by 77vette on Oct 29, 2010 19:13:36 GMT 12
haha 202 turbo chevette
thats so awesome
have seen a 202 chevette speedway car for sale on trademe
|
|
|
Post by cul8r on Oct 29, 2010 22:19:52 GMT 12
As on Oldschool, if theres anything I can help out with sing out!
|
|
|
Post by 202vette on Nov 1, 2010 21:39:13 GMT 12
We need some pipe for for the rollcage before we can go much further but here it is so far Sizing up the width and length of the block The rear guards lifted with the extra section, this allows us to tub outwards so if we decide to use a wider offset and big slicks its easy to adjust by going outwards. Cut the front corner of the floor to strengthen further as this is where the front of the rollcage will be and also the engine mounts.
|
|
|
Post by cul8r on Nov 2, 2010 18:39:59 GMT 12
Talked to brother he's not that keen to part with the calipers because he wants to save some to build a trailer... But if you want he has some VR vented calipers (have the cooling fins cast into the alloy) - which he said are the same as the V8 ones? If you want them $80.. Good condition..
|
|