|
|
Post by crazytim on Jul 5, 2009 11:24:12 GMT 12
I was after the rear discs altho some fronts for one of the others wouldnt go a miss lol. but if this chap has a use for them move em on...
Need to check out the spares that came with my new wagons, there are some rear calipers which I needed and I'm fairly certain the rear discs are there too! Altho I could use a 2nd set of rears... convert the Black chevini to rear discs too... enuff of the thread hijack, keep up the mean work Rootes! (or whatever ur name is...) ;D Inspiration when one or many rather of u fellers are doing phat work... will measure up them discs shortly too.
|
|
|
|
Post by Rootes on Jul 5, 2009 12:10:43 GMT 12
Oh i wouldn't say no! haha
I had thoughts about doing the stub swap, but wasn't to sure of the compatibility, glad to hear it's possible though.
Tensioner pad was actually in-stock at STA parts, along with the chain, so that was a relief to have them locally.
Zane
|
|
|
|
Post by gordo on Jul 5, 2009 20:23:25 GMT 12
The disc setup has the stubs, etc, but they've been buried at the back of the shed for a fair few years so not sure about condition - the good thing is that they're supposed to fit under 13" rims, which many of the 'vette chaps like to use.
|
|
|
|
Post by burntrubber on Jul 6, 2009 8:39:58 GMT 12
Non turbo Piazza front hubs and disks fit under 13's I got them on my TG. Turbo ones wont fit there 250mm non turbo are 230mm and yeah need the whole assembly to make it work including piazza tie-rod ends.
|
|
|
|
Post by gordo on Jul 6, 2009 20:37:58 GMT 12
Don't have the tie rod ends - I suppose it's a different sized taper from the 'vettes?
|
|
|
|
Post by burntrubber on Jul 7, 2009 18:54:52 GMT 12
Yeah differant taper oldschool mitsi colt are the same so I've read.
|
|
prozac
Junior Member
Posts: 92
|
Post by prozac on Aug 17, 2009 0:33:16 GMT 12
I got some tie rod ends new from stocks, cheap as chips and on the shelf.
|
|
prozac
Junior Member
Posts: 92
|
Post by prozac on Aug 17, 2009 0:33:41 GMT 12
I've just realised this thread is really old now... yeah, heh.
|
|
|
|
Post by Rootes on Jan 14, 2010 23:19:06 GMT 12
|
|
|
|
Post by cuteweegem on Jan 16, 2010 16:00:41 GMT 12
looks epic man ;D
|
|
|
|
Post by cul8r on Jan 16, 2010 19:19:19 GMT 12
Looks brilliant man!
To confirm the above chatter regarding piazza brakes..
Ive fitted the complete stub axles over, and the original chevette tie rods do fit the piazza rod ends! I think ideally the flexible hose could be longer by a inch or so. Other than that its fine..
|
|
|
|
Post by ryanz1 on Apr 18, 2010 20:05:18 GMT 12
Mags are awesome, in the third picture, what are they off? or where did you get them.
|
|
|
|
Post by misdablack on Apr 18, 2010 21:19:12 GMT 12
widened rostyles
|
|
|
|
Post by 77vette on Apr 19, 2010 11:29:48 GMT 12
lols looks like mine.....  im so glad those lard arse steels are now earning interest at asb rather than rusting under my house ;D |
|
|
|
Post by mralex on Aug 19, 2010 15:39:28 GMT 12
How did you lower it, looking to lower mine like that
|
|
