|
|
Post by 79hatchie on Nov 2, 2010 20:47:27 GMT 12
hb or hc 1300 viva front springs fit.
i had some with 2 coils whipped off and it was low and hard as all hell
|
|
|
|
Post by opelmantagsi on Nov 8, 2010 16:45:59 GMT 12
there is an outfit in christchurch that will either make new springs to your spec or take your original springs, heat treat them and reset to whatever hieght you want the car to sit at, we got it done, cost was about $400 including freight each way for all 4 springs and they came back powder coated red like new ones. the fronts are a nightmare to remove and reinstate without making up a special set of spring compressors.
|
|
|
|
Post by misdablack on Nov 8, 2010 17:24:47 GMT 12
nah man. you just need 2 jacks a pry bar and a big hammer - piece of piss. 400 bucks seems like a lot when you can just throw some gemini king springs in for about 3 hundy.
|
|
|
|
Post by gordo on Nov 8, 2010 19:46:48 GMT 12
Or a set of Spax springs and short, adjustable dampers for around $800 landed, IIRC.
Of course, then you'd have to wait a couple of weeks for them...
Have you signed up for the UK Chevette forum yet?
|
|
