|
|
Post by zep on Jun 14, 2007 18:07:35 GMT 12
Ok, so I need the whole front apron section from an early gem. As you can see in my pics mine's munted. Prozac, i'm counting on your car  Also, the entire rear section of a chevette (sedan?) would be good for my lights  |
|
|
|
Post by cul8r on Jun 14, 2007 19:02:19 GMT 12
Possibly be able to chop up a chevette hatch for you... Possibly pending a purchase of another...
Keeping it on a low down, only prozac knows what Im on about
Cheers,Chris
|
|
|
|
Post by zep on Jun 14, 2007 21:43:45 GMT 12
sweet as, let me know
|
|
|
|
Post by mikuni on Jun 15, 2007 8:16:25 GMT 12
Hey theres a sweet sedan sitting down these ways. Its pretty good rust wise and I'm looking at getting the diff this weekend and tom was going to come get the window winder and boot seal. I had a look at the rear lights for you (and others) but they weren't perfect, I didn't even think about the surrounding bit. How much do you want to pay? Up to about $40-50? I'll ask him if I can get it for less, but just so I know what to go up to. He's a rough Mrs Funt'maRunt so hopefully he'll be keens on the low down deals lol
|
|
|
|
Post by zep on Jun 15, 2007 17:58:00 GMT 12
I'd be keen for a pic before I pay for anything aye, but yeah 40-50 for the complete panel with lights'd be mint!
|
|
|
|
Post by mikuni on Jun 16, 2007 8:36:15 GMT 12
sweet, I'm going there now so I'll try get a couply pics or just hack it out if its cheap enough. As I said before the lights aren't mint, but you got some good ones off cul8r didn't you?
edit: just remembered, tom might be keen on the hole car as a track project, so if its real mint you might miss out. We'll suss it anyway.
|
|
|
|
Post by zep on Jun 16, 2007 10:01:17 GMT 12
hrrmmm, okm i'll just wait and see. Never got those lights aye...
|
|
|
|
Post by mikuni on Jun 16, 2007 16:57:56 GMT 12
Was real av. I took a picture which I might post later. Had a look at lights too but they had a couple of cracks etc. Probably shoulda grabbed them though. I got so much stuff for $80.
|
|
|
|
Post by cul8r on Jun 16, 2007 17:37:19 GMT 12
@ Zep, If "we" buy this car, then Im sure I can chop the old hatches rear light panel out , and get the valance shipped up in the same package...
Cheers,Chris
|
|
|
|
Post by zep on Jun 16, 2007 18:42:52 GMT 12
awesome dude.. keep me informed!! |
|
|
|
Post by cul8r on Jun 17, 2007 11:58:18 GMT 12
Will be able to tell you within oh about 3-4 Hours Cheers,Chris |
|
|
|
Post by mikuni on Jun 17, 2007 12:55:50 GMT 12
|
|
|
|
Post by cul8r on Jun 17, 2007 14:58:55 GMT 12
Yea, Could be keen
Yay! Won it, Can spill the beans now, Going to chop up 'old' car, as the cage would need severe modifications to be legal. Use all the good parts in that car ^^, (ie gem diff , running gear) Prozac is taking the Engine & box and a few misc parts..
Cheers,Chris
|
|
prozac
Junior Member
Posts: 92
|
Post by prozac on Jun 18, 2007 13:28:22 GMT 12
Sick  That front valance is all yours Zep, looks like it'll involve a little cutting to get out tho, but thats no biggie. |
|
|
|
Post by mikuni on Jun 18, 2007 13:59:30 GMT 12
Your good at that aren't you? Those turrets were awesome cheers man. A little bit of a slip with the grinder on one bit, but you won't even be able to see it once its welded in.
Did you get those lights prozac? I sent them last thursday I think..
|
|
