west
Full Member
Posts: 226
|
Post by west on Jul 12, 2006 13:05:13 GMT 12
As above need one to fit a 1" bore falcon master cylinder,
chur
021 127 4053
|
|
west
Full Member
Posts: 226
|
Post by west on Aug 9, 2006 10:47:10 GMT 12
ANYONE ABLE TO HELP ME?  ? dont really wanna have to fly one over from aus!!!! |
|
|
|
Post by burntrubber on Aug 9, 2006 19:14:20 GMT 12
I have one its in my TE so I'm not much help. Just mod the TG one I had it all measured up at one stage I was gunna use a commy master cylinder.
|
|
|
|
Post by zep on Aug 9, 2006 22:30:34 GMT 12
Must be someone wrecking a late model somewhere. Or are the TE different to TF/G?
|
|
|
|
Post by defcon on Aug 9, 2006 22:36:49 GMT 12
Ps there is none at pick-a-part rosebank
|
|
|
|
Post by zep on Aug 10, 2006 12:29:37 GMT 12
|
|
west
Full Member
Posts: 226
|
Post by west on Aug 10, 2006 13:15:19 GMT 12
Cheers boys, i think that one on trademe will be a tg, the mounting studs are different on the earlier ones, and the falcon or other masters that I have heard of dont fit tg, but will on earlier ones.
Defcon... Do you know if the commy one will fit a tg??
Tg booster has two studs coming off it, and make the master sit on an angle...
Failing all that, was thinking of just getting a booster +master off something else and putting the whole lot in?? any ideas??
|
|
|
|
Post by defcon on Aug 10, 2006 14:20:53 GMT 12
Nah the commy ones dont fit from what ive been told. Does the te have a 2 bolt or four bolt pattern? As far as im aware there are only to variations of booster, the early four bolt and the later model two bolt. The falcon master should fit most two bolts, its an xb master from memory. Ive had a few out at work when i was looking in to it. If its a four bolt then you'll probably have to buy one of hoppersstoppers, go to the site www.hoppersstoppers.com.au and give petter an email, or you could ring him on +61 3 97486950. Trust me he has all he answers to gemini masters/boosters. |
|
|
|
Post by defcon on Aug 10, 2006 14:25:38 GMT 12
Update, yeah the XB master only fits the td/te boosters, looks like the tf/g have a different booster setup.
|
|
|
|
Post by zep on Aug 10, 2006 16:48:43 GMT 12
I've just ordered by Hopper Stoppers master cyclinder. The dude, Peter, when I talked to him on the phone said that they have a direct replacement 1" bore m/c for both types of Gemini brake booster, 2 and 4 bolt.
|
|
|
|
Post by burntrubber on Aug 10, 2006 18:06:00 GMT 12
The TE is two bolt and the bolt centers are inline the TG is offset. There are heaps of cars that have a master cylinder will fit in booster but bolts dont line up I was gunna cut the old studs off and weld new ones to match the new master cylinder. I looked at the Piazza master cylinder it will fit on the TE booster. Wish I had the money to buy a hoppers kit  |
|
|
|
Post by defcon on Aug 10, 2006 18:09:39 GMT 12
There pretty reasonibly priced eh, 200 bucks plus postage with no hassels at all. Its basicly identical to the OE so it just fits right on!
|
|
|
|
Post by burntrubber on Aug 10, 2006 18:40:23 GMT 12
Yeah nah I'm a tight ass I'm sure I will be able to sort it for a lot less but a lot more work  spose it depends on what my time is worth to me. Does any one know what bolts on the TE anyway or has it already been said I might just swap boosters around seen as the TG is surposed to be the better car. |
|
west
Full Member
Posts: 226
|
Post by west on Aug 11, 2006 15:33:19 GMT 12
So the TGhas 2 bolts aswell as the TE, but the TG are offset, and the TE are straight?? Can someone confirm that?? Ive just emailed Gene of OZ gemini and hes gunna sed me one over for $50, so thats all good, TE I think his one is.. so hoppers have the master to bolt on to the TE? whats that off?? |
|
|
|
Post by burntrubber on Aug 11, 2006 17:11:32 GMT 12
Yeah the TE centers are in line and the TG are offset. Yay I finished work early today might have time for a drink finally  |
|
? dont really wanna have to fly one over from aus!!!!
spose it depends on what my time is worth to me. Does any one know what bolts on the TE anyway or has it already been said I might just swap boosters around seen as the TG is surposed to be the better car.