|
Post by caine on Jan 11, 2013 4:14:56 GMT 12
Lol cheers yea that's the plan gonna have another go at it over the weekend, rip them seats out and do some more paneling got a 2 pin hole rust spots up the front window seal so will do that when the welder comes out lol ill keep yas updated
|
|
|
Post by caine on Jan 12, 2013 14:34:39 GMT 12
One side done other one is in a wore state. Bit of bog covering a nice prang. To moved it looks like it can be mended out with someone's skills lol damn rear arch Attachments:
|
|
|
Post by caine on Jan 12, 2013 14:38:30 GMT 12
Did this one different just built up the primer around the window area . Once it fully dries ill hack at it with some finer paper to make it nice I'm no expert on paint lol tell me if I'm doing it wrong plz Attachments:
|
|
|
Post by caine on Jan 15, 2013 3:18:01 GMT 12
Alright some progress atm got a winning bid on a in parts 12 bridge port for $444 lol wtf ae let's hope this shot is easy to rebuild.....
|
|
|
Post by caine on Jan 16, 2013 15:44:48 GMT 12
Love cutties grrr Attachments:
|
|
|
Post by caine on Jan 16, 2013 15:46:43 GMT 12
6.5grands worth of engineering there Attachments:
|
|
|
Post by caine on Jan 16, 2013 15:48:13 GMT 12
Might end up welding this gaping hole up, pulled out some nice bits of nuts too Attachments:
|
|
|
Post by yammies on Jan 16, 2013 16:17:59 GMT 12
That trans tunnel is a mess! might be a good opportunity to get some decent room in there....
|
|
|
Post by caine on Jan 16, 2013 18:19:39 GMT 12
nuts yeah rock the tranny side to side u can feel the flex in the floor lol might be a paickapart job in the near future to find something that's a close good tidy fit - 3weeks off work next month so I hope to get stuck the Barry White into nuts
|
|
|
Post by caine on Jan 30, 2013 13:07:15 GMT 12
So I got one of the fender back on today, anyone know a trick to squareup the front while doing the back at the same time. Gotta bit of puss puss gap towards to top when the doors shut
|
|
|
Post by crazytim on Jan 30, 2013 22:57:49 GMT 12
Can't remember the trick Had same prob first guard out of line second one sorted I remember ignore took two pairs of hands.
|
|
|
Post by crazytim on Jan 30, 2013 23:00:59 GMT 12
I think from memory we bolted it on down the door line and worked our way tothe front.
|
|
|
Post by caine on Jan 31, 2013 2:08:07 GMT 12
So basically gap it correct on the door first then push/pull the front in or out
Ok cool I'm really just learning as I go now. Also trial fitted the bonnet aswell, the hinges don't seem to line up correct grrr what a pain
Anyone have a nice bonnet that they wana swap? I have crazy dent right at the front on the crease, could do a trade in lol
|
|
|
Post by crazytim on Feb 1, 2013 0:57:45 GMT 12
That's how I did Gemini guard. Trade in dented bonnet for swt one hmmmm, pass.
|
|
|
Post by caine on Feb 1, 2013 11:56:01 GMT 12
Yeah uncover the bog and was like wtf lol ill try n escape with it lol
|
|