|
|
Post by mikuni on Mar 16, 2011 18:03:15 GMT 12
I know what you mean, but just to compare apples with apples, you know? If you are buying a mega squirt to get it running with standard injection, then you might as well cost up a manifold to run a single weber down draft, as it will do about as good a job.
|
|
|
|
Post by misdablack on Mar 16, 2011 18:20:09 GMT 12
yeah i might ring around and get some prices just to compare
|
|
|
|
Post by misdablack on Mar 17, 2011 12:21:59 GMT 12
|
|
|
|
Post by 77vette on Mar 18, 2011 17:29:41 GMT 12
117 is not t car tho? hence differences. I bet the diff itself is same as isuzu gemini spec tho
|
|
|
|
Post by misdablack on Mar 18, 2011 18:03:29 GMT 12
technically no its not a t-car but alot of the parts are the same. that diffs a bit overpriced though and would be cheaper fitting a 4 link here. just interesting to know there are a few bolt in lsd's out there
|
|
|
|
Post by mikuni on Mar 18, 2011 18:43:06 GMT 12
that diff is a 4 link anyway - no torque tube or anything, it would be difficult to make fit. You'd be taking a risk assuming the head would fit in a Gemini housing too. Plus a million dollars for shipping
|
|
|
|
Post by misdablack on Mar 18, 2011 19:57:26 GMT 12
i meant fitting a 4 link & installing a hilux diff etc would be cheaper than importing 117 coupe diff
|
|
|
|
Post by mikuni on Mar 18, 2011 20:39:57 GMT 12
haha, yeah again, I know what you meant, all I'm saying is that even bringing that Isuzu 117 diff in won't be a bolt in because it is a 4 link setup anyway, no torque tube or anything so it would be just as difficult as putting any other diff in, 4 link or not.
|
|
|
|
Post by misdablack on Apr 2, 2011 17:46:02 GMT 12
steel surgeon reckons bout a hundy for some twin carb manny plates. including twin sidies should be very affordable engine with pretty decent output. just need headers and a new exhaust...and new paint lol. he also quoted me 75 bucks each incl gst for widening wheels which is very reasonable i think.
|
|
|
|
Post by crazytim on Apr 2, 2011 18:07:07 GMT 12
like
|
|
|
|
Post by misdablack on Apr 5, 2011 9:02:08 GMT 12
just bought these. pretty sure twin cams originally had solex mikuni side drafts anyway. for the price i couldnt resist  |
|
|
|
Post by 77vette on Apr 5, 2011 9:18:45 GMT 12
cool beans
|
|
|
|
Post by cul8r on Apr 5, 2011 22:22:59 GMT 12
Nice man, only thing with solex's is they're harder to get bits for, but in saying that if they're cheap and complete then you've nothing to worry about really!
|
|
|
|
Post by misdablack on Apr 20, 2011 19:48:03 GMT 12
|
|
|
|
Post by gordo on Apr 20, 2011 21:19:30 GMT 12
got a lot of other nice stuff there as well - mostly for bent 8s but much that can be used for other cars. |
|
