|
|
Post by misdablack on May 10, 2011 22:07:33 GMT 12
dont see why not
|
|
|
|
Post by taistorm on May 10, 2011 22:21:51 GMT 12
u rekon that color would suit 4 door vette? Yea mate, pretty sure Chevettes came outta the factory in an orange similar to that. Gotta love OJ  was gonna paint my old Mirage like that. Nice Gemini by the way, as Cul8r said needs more low in the rear! |
|
|
|
Post by crazytim on May 10, 2011 22:27:39 GMT 12
i have a heater, core will need repair has pinhole but fins etc all good. tried to steal it for my wagon and the bloody thing had pinhole in same place as the wagons original core.
heater is looped out at the mo. the heater unit i have, do you have controls in dash or is everything missing? I don't have all the piping... mite not have any piping... look local 1st let me know if you want it dont want much for it.
|
|
|
|
Post by nzgemini666 on May 10, 2011 22:42:40 GMT 12
aw yeah could be keen iv got the controls on the dash it shouldnt be to hard to find piping to fit it how much do you want and where in nz are u man
|
|
|
|
Post by crazytim on May 10, 2011 22:49:46 GMT 12
|
|
|
|
Post by gemininja on May 10, 2011 23:09:14 GMT 12
"psssst. those are jafas ^^"
|
|
|
|
Post by gordo on May 10, 2011 23:15:14 GMT 12
u rekon that color would suit 4 door vette? Yea mate, pretty sure Chevettes came outta the factory in an orange similar to that. Gotta love OJ was gonna paint my old Mirage like that. Nice Gemini by the way, as Cul8r said needs more low in the rear! It's "Mandarin Red", although it looks more like an orange. - mine is that colour  |
|
|
|
Post by nzgemini666 on May 12, 2011 19:13:23 GMT 12
Does a 1800 head fit onto a 1600 motor
|
|
|
|
Post by crazytim on May 12, 2011 19:22:20 GMT 12
single cam onto single cam yes but pointless... others will know the reasons, compression blah blah they use G161z heads on G200z blocks to up compression I think it is... what do I know a G180z head may be identical...
Do you need a new head? pulling an engine down soon... could get it crack tested at your own cost prior to payment and freight... $60 for head if all good... ran sweet, rings were shot though... made massive clouds of smoke so scrapping the engine.
|
|
|
|
Post by nzgemini666 on May 12, 2011 19:29:06 GMT 12
My heads fine just needa make my gem faster iv got a weber to put on sooon
|
|
|
|
Post by cul8r on May 12, 2011 21:08:44 GMT 12
You'd be better off with weber and extractors (and then getting exhaust done - a decent exhaust opens up and gave the wagon the same fuel economy as the original motor)
If you want to look down more power, easiest for least amount of money is a g200z. Then look at working a motor
|
|
|
|
Post by misdablack on May 12, 2011 22:12:27 GMT 12
pretty hard to find a g180z in NZ anyway. like the other guys said just put a g200z in and work that or if you can find a twin cam even better. other options are the 4zc1-t or a 4ze1 2.6 rodeo engine
|
|
|
|
Post by crazytim on Oct 27, 2011 22:03:54 GMT 12
aw yeah could be keen iv got the controls on the dash it shouldnt be to hard to find piping to fit it how much do you want and where in nz are u man checked thread to see what shape gem you want wiper motor for... my spare will need mods to work as its a 5 pin plug version from a TX/TC/TD and maybe TE. Appears it would bolt in OK but would need to chop your plug off loom and either find a similar plug to fit new motor or crimp on some flat plugs... or try and make two motors into one if that works, motor part looks same as the one in my TG wagon. Anyway holler out mate, may be better than nothing or perhaps continue the search. |
|
was gonna paint my old Mirage like that.
